Some advices about how to maintain your hot tub
Here are several advices on how to maintain your hot tub and also a recommandation if you live in Colorado. Keep your spa water clean from algae, bacteria and other unwanted impurities by maintaining a safe amount of sanitizer. With too much sanitizer in your spa water, your lungs, skin and eyes may become irritated.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.
Advices for purchasing a hot tub : Reclined seating lets you lay back, fully submerged in spa water. Loungers usually have more jets for a full-body massage. The best spas are deep enough to prevent you from floating out of the lounger. A lounge takes the equivalent space of up two standard seats. Tubs for families or friends the need more seats could skip the lounger for an extra spot.
One of the most important things you can do to increase the longevity of your spa cover is to remove it at least twice per week. Use a spa cover lifter to completely remove it, or if you don’t have a spa cover lift, gently place it off the spa. Give your cover a few hours to breathe and shake off some of the constant heat and moisture. This is also a good time to add chemicals or shock the spa if you aren’t using it at the time.
Tap water is pretty good spa water in most areas. But in some areas (and you know where you are), you can run into issues of soft or hard water, high alkalinity, pH imbalance, or high levels of chloramines, metals and minerals. You can test your tap water with your test kit, or when testing after a drain and refill, you can measure the suitability of your tap water as spa water. Using a spa pre-filter removes metals, odors and the finest silt from your spa fill water. See extra details at Pro hot tub repair service in Colorado.